TECHNICAL SPECIFICATION OF
LIGHT DUTY PRECISION LATHE MACHIN
| DESCRIPTION | LD NO.1 | LD NO.2 | LD NO.3 |
|---|---|---|---|
| LENGTH OF BED | 1370 MM(4'6") | 1600 MM (5'3") | 1830 MM (6") |
| MAX. A.B. CENTER | 685 MM (27") | 915 MM (36") | 1145 MM (45") |
| MAX. SWING OVER BED | 305 MM (12") | 305 MM (12") | 305 MM (12") |
| MAX. SWING WITHOUT GAP | 485 MM (19") | 495 MM (19") | 495 MM (19") |
| MAX. SWING OVER CROSS SLIDE | 178 MM (7") | 178 MM (7") | 178 MM (7") |
| HEIGHT OF CENTER OVER FLATE BED WAYS | 165 MM (6-1/2") | 165 MM (6-1/2") | 165 MM (6-1/2") |
| WIDTH OF BED | 240 MM (9-1/2") | 240 MM (9-1/2") | 240 MM (9-1/2") |
| SPINDLE SPEEDS | 40 MM (1.9/16") | 40 MM (1.9/16") | 40 MM (1.9/16") |
| NO. OF SPINDLE SPEEDS |
8
SPEED (35 TO 855 RPM" ) |
8
SPEED (35 TO 855 RPM" ) |
8
SPEED (35 TO 855 RPM" ) |
| LEAD SCREW DIA. PITCH | 25 (1" x 4 " TPI) | 25 (1" x 4 " TPI) | 25 (1" x 4 " TPI) |
| TAPPER OF CENTER IN HEAD T.S | MT. - 3. | MT. - 3. | MT. - 3. |
|
STANDARD
ACC. :
CHUCK PLATE, 2 NOS DEAD CENTER,
CENTER ADAPTER, TOOLS POST KEY, CHANGE GEAR SET,
MOTOR PULLY EXTRA STANDARD & ELECTRICALS ACC.: STEADY REST, FOLLOW REST, FACE PLATE , CHUCK , ELE. MOTOR, RE SWITCH , MOTOR V-BELT |
|||
.png)
